Water Damage Repair Methods

Disconnect the power, unplug and remove electronics, remove movable items and furniture immediately. The first thing you need to do for water damage restoration is to move all these items away. The faster you get the items out of water’s reach, the brighter will be the chances of saving them. Firstly, move all your electrical items, and if possible, turn off the power that moves into the affected area, particularly if water has reached above the electrical outlets.

Remove any under padding and carpets. You might be able to save your carpet after getting it cleaned and disinfected, but chances are that it may shrink, and you will be able to use it only as an area rug. Chances of saving your under padding are rare, as it acts like a sponge, and soaks up lots of water.

Remove water. For water damage restoration, you need to get rid of all collected water, and there are many ways to do so. If there is no power, or you feel there might be loose wires, then the manual way of removing water will be ideal. Use buckets, mops, and old towels to soak up as much of water as you can. If the sewers in your neighborhood are not backed up, you can easily pour all the water you have collected down the drain, else you need to pour it onto some permeable surface. If the flooded area is overwhelming and there is power, then you can rent a sump pump from some local hardware store. Remember, it is very important to get rid of all accumulated water, after which you need to dry out the area to avoid mold growth.

Dry out the area. After you have mopped up the water from the area, use a dehumidifier or fans to dry out the place. If it is not raining outside, you should open the windows to enable quicker drying, and to allow air circulation. It is important to dry the area as fast as possible. If water has accumulated in your finished basement, and your drywall was affected, then you perhaps will have to cut away those places that were touched by water, since drywall will easily, and the paper backing will serve as great food for mold.

Disinfect. The next step in water damage restoration is to disinfect the dried out area. You need to disinfect all places including drywall, insulation, wood beams, etc., with a good disinfectant to remove any bacteria that might have entered through toilets, sewers, etc. Disinfect every area and everything that has been affected by floodwaters, like the walls, non-upholstered and wood furniture.

Get rid of damaged items wisely. You perhaps would want to throw away everything that was damaged into a dumpster and get it out of site. But, if you organize damaged things into a pile, and carefully look for things that can be taken into recycling centers, then you can ease the pressure on the local landfill site. You can visit your town or city’s waste management website to learn where you can recycle old paints, toxic liquids, adhesives, and damaged electronics like computers, furniture, TVs and also drywall.

These are some easy methods for water damage restoration, but before you start, call your insurance company, and tell them what you plan to do. You can always opt for restoration here for your water damage restoration needs in Houston area

Visit us today for Houston Water Damage https://restorationhere.com